Part 5: operation, Operating tips – Philco PEI 12715 Uživatelská příručka
Stránka 16
EN - 14
04/2012
Copyright © 2012, Fast ČR, a. s.
PART 5: OPERATION
Remove the protective foil from the control panel.
The range hood is controlled only by means of a remote control.
button – This button serves to turn the range hood on / off . When it is pressed the range hood motor starts
running at 1 (lowest power). An LED indicator light (on the far left side) will light up on the range hood. If you
increase the exhaust power level to 2 then two LED indicators will be lit, etc.
– button - This button serves to reduce the exhaust power level. Each time it is pressed the exhaust power level
will decrease by 1 level. The lowest level is 1.
+ button - This button serves to increase the exhaust power level. Each time it is pressed the exhaust power
level will increase by 1 level. The highest level is 4.
Timer
Press and hold the – button for at least 2 seconds and the timer function will be turned on for a period
of 15 minutes. The LED indicator light on the far right will be lit. The motor will automatically turn off after
15 minutes or if you change the exhaust power level.
NOTE:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend to
leave the range hood running a few minutes longer than the stove to ensure that all odours are extracted.
Lighting
The range hood is equipped with 3 groups lights.
1. Group: press the
button, while the lights are off and the 2 middle lights will turn on.
2. Group: press the
button again, the 2 middle lights will turn off and 4 lights on the sides will turn on.
3. Group: press the
button once more and all the lights will turn on.
If you press the
button again the lights will turn off .
NOTE:
If you do not perform any operation within 4 hours, the range hood will turn off automatically.
Operating tips
1. Regularly clean the aluminium fi lters and regularly replace the carbon fi lters.
2. Use the medium exhaust power level. Only use the highest power level when necessary.
3. To ensure proper ventilation, leave windows closed while the appliance is turned on.