Part 4: operation, Operating tips – Philco PEI 4701 Uživatelská příručka

Stránka 14

Advertising
background image

EN - 12

04/2012

Copyright © 2012, Fast ČR, a. s.

PART 4: OPERATION

Remove the protective foil from the control panel.

Exhaust power selection
This range hood is equipped with 5 levels of exhaust power. Select the power level based on the use of the
stove and the amount steam that the pots emit.
To turn on the motor press the

button and to set the exhaust power level press the

or

button. Press

the

button to increase the exhaust power and the

button to reduce the exhaust power.

Remote control
sensor

Automatic timer (TIMER)
Press and hold the

button at the set exhaust power level for at least 2 seconds and the automatic timer

function will be turned on for a period of 15 minutes. When the function is turned on, the respective symbol
will appear on the display and the motor will turn off automatically after 15 minutes.

NOTE:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend to
leave the range hood running a few minutes longer than the stove to ensure that all odours are extracted.

Lighting
The range hood is equipped with lighting. Press the button with the light symbol to turn on the lights.
Press the button again to turn the lights off .

NOTE:
If the range hood is equipped with the brightness dimming feature, follow the instructions below.

Changing the brightness of the lights (Dimming)

While the light is on, press and hold down the

button and the brightness will start to change. As soon as

you reach the desired brightness level, release the pressed button. The set brightness will be stored in memory
for future use.
If you press the

button twice in succession, the light will be lit at the maximum brightness level. The light

will always start at the preset brightness level.

Operating tips

1. Regularly clean the aluminium fi lters and regularly replace the carbon fi lters.
2. Use the medium exhaust power level. Only use the highest power level when necessary.
3. To ensure proper ventilation, leave windows closed while the appliance is turned on.

Advertising