Part 5: maintenance and cleaning, Changing a light bulb – Philco PEI 4701 Uživatelská příručka
Stránka 15
EN - 13
04/2012
Copyright © 2012, Fast ČR, a. s.
PART 5: MAINTENANCE AND CLEANING
WARNING!
Before cleaning, regular or other maintenance, installation or removal, check that the appliance
is turned off and disconnected from the power socket or that the respective circuit breaker
is turned off .
Changing a light bulb
Turn off the appliance.
Take out the aluminium fi lter.
If the light bulb broke during operation wait until it cools down.
Models with a 50W halogen light bulb
To remove the halogen light bulb (50 W), press the light bulb holder downwards and gently turn it
anticlockwise. Remove the light bulb.
Install a light bulb with the same parameters in reverse sequence.
Models with a 20 W light bulb
To remove the halogen light bulb (20 W), fi rst remove the glass cover using a thin screwdriver. Be careful
not to scratch the appliance. Remove a faulty light bulb by pulling downwards and insert a new working
light bulb.
Use a light bulb with the same parameters.
NOTE:
Do not hold the light bulb with your bare hands. Dirt or sweat from the hand may shorten their lifetime.