Philco PLD 1061 M - Příručka (Stránka 18)

EN - 16
10/2014 Copyright © 2014, Fast ČR, a. s.
PART 5: MAINTENANCE AND CLEANING
Prior to commencing maintenance, disconnect the power plug from the power socket or disengage the
electrical circuit to which the washing machine is connected and turn off the water supply taps.
WARNING!
-
It is forbidden to use solvents as they could damage the washing machine and, furthermore,
toxic fumes are emitted that could explode.
- Do not expose the washing machine to dripping or spraying water or any another liquid.
Do not wash the washing machine with water.
- It is forbidden to use cleaning agents containing PCMX.
Cleaning and maintenance of the outer surface of the washing machine
Proper maintenance of the washing machine may extend its lifetime. If necessary, wipe the outer surface with
a soft sponge dipped in warm water with a small amount of neutral cleaning agent. Immediately wipe dry
using a clean dry cloth. Do not use sharp objects that could scratch the outer surface.
NOTE:
It is forbidden to use formic acid, its substitutes or other similar substances.
Clean the drum
Rust that forms inside the drum should be removed immediately using a chlorine-free cleaning agent.
Never use steel wool.
Handling a frozen washing machine
If the temperature falls below zero and your washing machine freezes, it is necessary to:
1. Disconnect the power plug from the power socket.
2. Wash the water supply valve with warm water to release the water supply hose.
3. Remove the water supply hose and dip it in warm water.
4. Pour warm water into the drum of the washing machine and wait 10 minutes.
5. Reconnect the water supply hose to the tap and check that the water supply and drain hoses work
normally.
NOTE:
If you will be using the washing machine, make sure that the ambient temperature is above zero.
Anti-frost protection
If the washing machine is located in a room where there is a risk of it freezing, drain the remaining water inside
the drain and water supply hoses.