Part 8: automatic malfunction detection system, En - 22 – Philco PLD 1061 M Uživatelská příručka
Stránka 24
EN - 22
10/2014
Copyright © 2014, Fast ČR, a. s.
PART 8: AUTOMATIC MALFUNCTION DETECTION SYSTEM
LED
display
Description
Cause
Solution
E30
Problem with the door
lock
The door is not properly shut.
Shut the door properly and turn
it on again.
Contact a service centre if the problem persists.
E10
Problem with the water
inlet during a wash
The water inlet is not open or the
water is fl owing too slowly.
The water inlet fi lter is clogged.
The supply hose is twisted.
Water supply was not cut off .
Open the water inlet or wait until
the water pressure returns to
normal.
Check the water inlet fi lter.
Straighten the supply hose.
Check in other rooms whether
water is running.
Contact a service centre if the problem persists.
E21
Problem with draining
water during a wash
The drain hose is clogged
or twisted.
The pump is clogged.
Wash and straighten out the drain
hose.
Clean out the pump fi lter.
Contact a service centre if the problem persists.
If a diff erent problem occurs, please contact an authorised service centre.