Philco PLD 1061 M - Příručka (Stránka 6)

EN - 4
10/2014 Copyright © 2014, Fast ČR, a. s.
-
Do not install your washing machine in rooms with high humidity
or in rooms with explosive or caustic gases.
- Make sure that the water and electrical devices must be connected
by a qualifi ed technician in accordance with the manufacturer’s
instructions and local safety regulations.
- Before operating this machine,all packages and transport bolts
must be removed. Otherwise, the washing machine may be
seriously damaged while washing the clothes.
- Before washing the clothes at fi rst time, the washing machine
shall be operated in one round of the whole procedures without
the clothes inside.
- The washing machine with single inlet valve only can be
connected to the cold water supply. The washing machine with
double inlet valves can be connected to the hot water and cold
water supply.
- Your washing machine is only for home use and is only designed
for the textiles suitable for machine washing.
- Flammable and explosive or toxic solvents are forbidden. Gasoline
and alcohol etc. Shall not be used as detergents. Please only select
the detergents suitable for machine washing, especially for drum.
- It is forbidden to wash carpets.
- Be careful of burning when washing machine drains hot washing
water.
- Never refi ll the water by hand during washing.
- After the program is completed, Please wait for two minutes to
open the door.
- Please remember to disconnect water and power supply
immediately after the clothes are washed.
- Do not climb up and sit on top cover of the machine.
- Do not lean against machine door.