Philco PLA 1483 - Příručka (Stránka 23)

EN - 21
01/2011 Copyright © 2011, Fast ČR, a. s.
PART 5: MAINTENANCE AND CLEANING
• Disconnect the washing machine from the power socket.
• Shut off the water inlet.
Electronic display/warning symbols
Notifi cation of an outage / low water pressure
If the symbol lights up on the electronic display:
• The water supply may be clogged. Check it.
• There may be a water outage. Check it. If it is so, switch the program selector to position 0. You can select
a program and start the washing machine once water supply is renewed.
• The water pressure may be low. Check it.
• The supply hose may be bent. Check it.
• The supply hose may be clogged. Clean the supply hose fi lters. (*)
• The inlet valve fi lter may be clogged. Clean the inlet valve fi lters. (*)
(*) See chapter referring to cleaning and maintenance
Notifi cation of clogged pump fi lter
If the symbol lights up on the electronic display:
• The pump fi lter may be clogged. Clean out the pump fi lter. (*)
• The drain hose may be clogged or bent. Check the drain hose.
(*) See chapter referring to cleaning and maintenance.
PART 5: MAINTENANCE AND CLEANING