Part 2: installation, Removal of the transportation screws – Philco PLA 1483 Uživatelská příručka
Stránka 6
EN - 4
01/2011
Copyright © 2011, Fast ČR, a. s.
PART 2: INSTALLATION
Carefully read the entire user's manual before putting your washing machine into operation and store it in a
safe place for future reference.
Removal of the transportation screws
•
You must remove the transportation screws located in the back part of the washing machine before
putting it into operation.
•
Loosen the bolts using a correctly sized spanner, turning it anticlockwise. (PIC. 1)
•
Remove the bolts by pulling them out. (PIC. 2)
•
Insert plastic plugs found in the accessories pouch, into the transportation screw openings. (PIC. 3)
•
Carefully store the transportation screws removed from the washing machine for future transport purposes.
NOTE:
Defects caused by starting the washing machine with the transportation screws installed are not covered
by the warranty.
PIC. 1
PIC. 2
PIC. 3