Philco PLD 1273 Crown - Příručka (Stránka 23)

EN - 21
04/2015 Copyright © 2015, Fast ČR, a. s.
WARNING:
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door tightly to avoid pinching the
kids.
Remove foreign matters
Drain Pump Filter:
Drain pump fi lter can fi lter the yarns and small foreign matters from the washings.
Clean the fi lter periodically to ensure the normal operation of washing machine.
WARNING:
First, drain the water with drain pump and then open the drain pump to clean away foreign matters from
drain pump fi lter. Take care if the drained water is hot.
Cleaning the pump
Important
According to the soil level within the cycles and the frequency of the cycles, you have to inspect and clean
the fi lter regularly.
The pump should be inspected if the machine does not empty and/or spin;
the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking
the pump.
Proceed as follows:
Open
the service panel
Unscrew
the pump cover
Remove
the pump cover
Close
the service panel
1 Disconnect the appliance.
2 If necessary wait until the water has cooled down.
3 Open the service panel .Place a container close to collect any spillage.
4 When no more water comes out, unscrew the pump cover and remove it.
Always keep a rag nearby to dry up spillage of water when removing the cover.
5 Remove any objects from the pump impeller by rotating it.
6 Screw the pump cover fully in.
7 Close the service panel.
WARNING:
When the appliance is in use and depending on the programme selected there can be hot water in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has fi nished
the cycle, and is empty. When replacing the cover, ensure it is securely retightend so as to stop leaks and
young children being able to remove it.