Philco PLD 1272 - Příručka (Stránka 21)

EN - 19
05/2013 Copyright © 2013, Fast ČR, a. s.
Pump fi lter
The pump fi ltration system extends the life of the pump, which is used for draining dirty water. It ensures that
lint from the laundry does not enter the pump. We recommend you clean the pump fi lter every 2-3 months.
Clean the pump fi lter as follows:
 Open the cover on the bottom strip using the measuring cup or adapter (depending
on the model). Before opening the fi lter cover, place a container in front of it, into
which the water remaining in the washing machine will fl ow.
 Loosen the fi lter cover by turning it anticlockwise and drain the water.
 Remove all foreign material from the fi lter.
 Check by hand that the pump rotates.
 After cleaning the pump, return the fi lter by turning it clockwise.
 Reattach the kick plate cover.
 Don't forget that if you do not reinstall the fi lter correctly, water will leak from your
washing machine.
WARNING:
Danger of scalding!
Because the water in the pump may be very hot, wait until it has cooled down.
Drawer for washing detergents
Over time washing detergent deposits may accumulate in the drawer and in the washing machine opening.
Therefore, the washing detergent drawer needs to be regularly cleaned from accumulated deposits. Take the
drawer out as follows:
 Pull the drawer out completely.
 Fully press down the lid of the siphon inside the drawer and pull the drawer until you pull it out.
 Wash using water and a brush.
 Remove the deposits accumulated inside the drawer opening without them being allowed to enter the
washing machine.
 Once the drawer is dry, insert it back into the washing machine in the reverse sequence here described.