Philco PLD 1272 - Příručka (Stránka 6)

EN - 4
05/2013 Copyright © 2013, Fast ČR, a. s.
PART 2: INSTALLATION
Carefully read the entire user's manual before putting your washing machine into operation and store it in
a safe place for future reference.
Removal of the transportation screws
 You must remove the transportation screws located in the back part of the washing machine before
putting it into operation.
 Loosen the bolts using a correctly sized spanner, turning it anticlockwise.
 Remove the bolts by pulling them out.
 Insert the plastic plugs found in the accessories pouch into the transportation screw holes.
 Carefully store the transportation screws removed from the washing machine for future transport purposes.
X
4
X
4
X
4
NOTE:
Defects caused by starting the washing machine with the transportation screws installed are not covered
by the warranty.
Levelling the washing machine
 Do not place the washing machine on carpets or similar surfaces.
 To ensure quiet and vibration free operation of your washing machine, you should place it on an even,
non-slip and rigid surface.
You can level the washing machine by adjusting the adjustable feet:
 First loosen the plastic nut.
 Adjust by screwing out the feet upwards or downwards.
 After levelling the washing machine, re-tighten the plastic nut by screwing it upwards.
 Never level the washing machine on an uneven surface by placing cardboard, wooden blocks, etc. under the feet.
X
4