Philco PLD 14961 WD - Příručka (Stránka 21)

EN - 19
02/2013 Copyright © 2013, Fast ČR, a. s.
Placing laundry into the washing machine
It is necessary to select a program before placing laundry into the washing machine.
Otherwise the load sensor will not be activated.
NOTE:
The maximum laundry volume can vary depending on the selected program. Do not exceed the maximum
capacity specifi ed in the program chart. If you exceed the capacity of the selected program, the display
will show the
symbol and a warning sound will be made. Keep removing excess laundry from the
drum of the washing machine until the symbol disappears.
x Open the door of the washing machine.
x Check that there are no foreign objects, laundry or animals in the drum. The drum could contain laundry
from the previous wash. Remove the laundry from the washing machine.
x Arrange the laundry evenly inside the washing machine. Fold large items such as bed sheets or covers in
the manner shown in the illustration below.
x The washing machine is equipped with a system that detects the amount of inserted laundry. The system
weighs the laundry inside the drum and this value is shown on the display. The values for the selected
program are set automatically (duration, electricity and water consumption, etc.).
x If you start an overloaded washing machine, you can negatively aff ect the washing and drying results.
x Furthermore, you will cause damage to the washing machine and the laundry, which may turn yellow
during the drying process.
x Insert one item at a time.
x When closing the door, make sure that no laundry has been caught in the door.
x Check that the washing machine door is properly closed.
x Firmly close the washing machine door, otherwise the washing machine will not start.