Philco PHS 316 - Příručka (Stránka 11)

EN - 9
© 2012 09/2012
While the hotplates are locked, it is only possible to use the main power switch , all other buttons will
be deactivated. When you press a button in the lock mode, a sound is made and the lock indicator will start
fl ashing. You will only be able use the main power switch . If you turn off the appliance, the function will
remain activated even when it is turned on again.
Press the button for 2 seconds to cancel the function and the indicator will disappear. Now you will be
able to fully use the appliance.
Suitable cookware
Do not use cookware that has a coarse base because this base could scratch the glass ceramic surface.
Suitable cookware should have a thick fl at base. Before using and placing the cookware on the cooktop,
check that the base is clean and dry.
Place the cookware on the hotplate before turning it on.
Always use a lid on the cookware. The cookware base should not be smaller or larger than the diameter of
the hotplate. To prevent wasting energy, the cookware should be at least as large as the hotplate - see picture
below.
RIGHT WRONG WRONG WRONG
Energy savings
• Place the cookware on the hotplate before turning it on. If you turn on the hotplate before placing the
cookware on it, the hotplate will not turn on and the display will show.
• To reduce the cooking time use a lid.
• As soon as the liquid starts to bo il, lower the temperature.
• To shorten the cooking time reduce the amount of water and fat to a minimum.
• Select the respective temperature for the given type of food.