Philco PMD 25 BIB - Příručka (Stránka 10)

EN - 8
09/2012 Copyright © 2012, Fast ČR, a. s.
3. Insert the microwave into the installation location. Check that the distance on the right and left side is the
same and that the stopper is in the back part.
4. After placement, open the oven door and in the front part of the interior of the oven there is a hole for the
locking screw (4 x 35 mm). Insert the screw into this hole and screw it in. Check that it is properly tightened.
Place the cover over the screw.
NOTE:
In the back part of the cabinet and along its sides, it is necessary to provide for at least a 10 cm distance
from the wall or fl oor.