Philco PMD 25 BIB - Příručka (Stránka 14)

EN - 12
09/2012 Copyright © 2012, Fast ČR, a. s.
PART 6: OPERATING INSTRUCTIONS FOR THE MICROWAVE OVEN
General use
1. Connect the power plug to a power socket with a rating of 230 V ~ 50 Hz.
2. Place the food into a container suitable for use in a microwave oven, open the door. Check that the guide
and the rotating plate are correctly installed. Place the container on to the glass plate.
3. Close the door. Check that it is closed properly.
4. You can open the microwave oven door at any time and this will pause the operation of the oven. To
continue, close the door and press the START/RESET buttons.
5. If you do not set the power level, the microwave oven will heat at the maximum power level.
6. ":0" will appear on the display after it is connected to a power socket.
7. If you press the Pause/Cancel button during operation, the cooking process will stop. If you wish to cancel
the cooking process and delete the entered data (excluding clock settings), press the Pause/Cancel button
again. If you open the door, the data will be kept.
8. If you press the START/RESET button and the oven does not start, check the space between the door and
the gasket seal for any obstacles preventing it from closing. Check that the door is closed properly. The
microwave oven will not start until the door is properly closed or the program will be reset.
NOTE:
Check that the microwave oven is properly installed and connected to the power socket.
Quick heat
This function makes it possible to turn on the microwave oven at maximum power for 30 seconds.
Example: if you wish to heat a glass of milk
1. Place a glass of milk on to the rotating plate and close the oven door.
2. Press
the START/RESET button. The microwave oven will automatically start at the maximum power level
for a time of 30 seconds.
3. After heating is fi nished, 5 sounds will be made.
Cooking using a microwave
A. Quick microwave heating (100% power)
Example: heating food at 100% power for a time of 5 minutes.
1. Set the time to "5:00"
2. Press
the START/RESET button.
B. Manual power setting
Example: heating food at 60% power for a time of 10 minutes.
1. Turn
the function selection dial and select "Med". "P-60" will appear on the display.
2. Turn the DEFROST/TIMESETTING dial to set the time to "10:00".
3. Press the START/RESET button.