Philco PEW 6713 - Příručka (Stránka 14)

EN - 12
04/2012 Copyright © 2012, Fast ČR, a. s.
11. Installation of the inner chimney
Pull the inner chimney out of the outer chimney and secure to the plate using 9.5 x 3.5 screws.
3.5 x 9.5 screw
Inner chimney
After completing the installation check that the range hood is correctly installed and works properly.
Carbon fi lter
If you are using the range hood without an air exhaust, it is necessary to use a carbon fi lter. The carbon fi lter is
not included. Contact your vendor or an authorised service centre to purchase this fi lter.
 Before installing or replacing the carbon fi lter, check that the appliance is turned off and disconnected
from the power socket or that the respective circuit breaker is turned off .
 It is necessary to replace the carbon fi lter regularly every 3 – 5 months depending on how much the
appliance is used.
 Never wash the carbon fi lter in water unless the manufacturer states otherwise.
 Aluminium fi lters must always be installed even when the carbon fi lter is not installed. Do not use the
appliance without the aluminium fi lter installed.