Philco PEW 6713 - Příručka (Stránka 18)

EN - 16
04/2012 Copyright © 2012, Fast ČR, a. s.
Models with an LCD display – 5 speeds
This range hood is equipped with 5 levels of exhaust power. Select the power level based on the use of the
stove and the amount steam that the pots emit.
On / Off button – Press the button once to turn on the range hood. The initial exhaust power level is 2. Press
again to turn the range hood off .
Setting the exhaust power level – To set the exhaust power level press the + or – button. Press the + button
to increase the exhaust power and the – button to reduce the exhaust power. If you press and hold down the
+/- button for at least 2 seconds, the exhaust power levels will increase / decrease in half-second intervals.
If you set the exhaust power level to maximum (5), the appliance will work at the maximum exhaust power
level for 15 minutes and then continue at the exhaust power level of 2. The maximum exhaust power level is
called "turbo speed".
Timer
TIMER –
button: Set the operating time of the appliance with a countdown feature during operation. Each
time it is pressed the power level will decrease by 1 level. If you press and hold down this button for at least
2 seconds, the power level will decline faster.
TIMER – button: Set the operating time of the appliance with a count-up feature during operation. Each
time it is pressed the power level will increase by 1 level. If you press and hold down this button for at least
2 seconds, the power level will increase faster.
Timer functions:
1. Turn off the range hood – If you set the timer while the range hood is running, the range hood will stop
running, lights will turn off and a warning sound will be emitted for 5 seconds after the timer duration
comes to an end.
2. Alarm – If you set the timer while the range hood is not running, then an alarm will be set. As soon as the
set time of the timer comes to an end, a sound will be emitted for 15 seconds. The range hood will not stop
and the lights will stay on, if the alarm timer turns off .
If a timer is not set, the clock is displayed.
Clock
The clock on the display shows the current time. If the clock is set, the colon between the hours and minutes
will fl ash once a second.
Setting the time
1. Press the and buttons at the same time.
2. The hours and minutes will start to fl ash for 5 seconds.
3. In this time press the or button to set the hours or minutes.
If a power outage occurs, it will be necessary to set the time again.