Philco PEW 6713 - Příručka (Stránka 19)

EN - 17
04/2012 Copyright © 2012, Fast ČR, a. s.
Additional functions
Additional functions may be set only when the motor and the lights are off .
1. Setting the backlight brightness – Press and hold the button – after about 5 seconds the blue colour
intensity in percent will appear (e.g. b00). Press the button – once and the colour of the display colour will
change to red (e.g. r100), press the button – once more and the display colour to green (e.g. g10).
After selecting the colour, use the / buttons to set the brightness of the respective display colour
(e.g. 0 – 100). To confi rm the setting press and hold button – for approx. 5 seconds. A sound will be made.
If you do not wish to save the setting, press the button or the button for the light.
2. Backlight – The display backlight is always on. Press and hold the + button for approx. 5 seconds. A sound
will be made. Now you can turn off the backlight. If you wish to again turn on the display backlight, press
and hold down the + button for approx. 5 seconds.
Blue (%) Red (%) Green (%) Colour
100 100 100 Turquoise
0 100 100 Light green
0 0 100 Green
100 0 0 Blue
50 100 0 Violet
0 100 0 Red
0 0 0 Colourless display
0 100 10 Orange
Operating tips
1. Regularly clean the aluminium fi lters and regularly replace the carbon fi lters.
2. Use the medium exhaust power level. Only use the highest power level when necessary.
3. To ensure proper ventilation, leave windows closed while the appliance is turned on.