Ventilation, Replacing the carbon fi lter – Philco PEW 6713 Uživatelská příručka
Stránka 15
EN - 13
04/2012
Copyright © 2012, Fast ČR, a. s.
Replacing the carbon fi lter
1. For the correct operation of the appliance it is necessary to install a carbon fi lter. The number and type
depends on the model.
2. Place the carbon fi lter on the motor outlets and turn it in the clockwise direction.
3. To remove the carbon fi lter turn it in the anticlockwise direction.
or
Ventilation
To ensure proper ventilation, leave windows closed while the appliance is turned on.
WARNING!
Pay increased attention if you are using the appliance together with another appliance that uses
air or fuel for its operation (e.g. heating fan, fan, etc.) or that uses gas, coal or wood, as its operation
may negatively aff ect the performance of the range hood because it expels air out of the room.
This warning does not apply if you installed the appliance without an exhaust out of the room.
- PEW 9713 PEW 6714GLIX PEW 9714GLIX PEW 910 IX PEW 6710 IX PEW 9710 IX PEW 613 PEW 913 PEW 6742 A PEW 9742 A PEI 904 PEI 9704 PEI 9703 PEW 941 BX PEW 9743 T PEB 6444 IX PEW 6711 PEW 6509B PEW 9509B PEW 9711 PEI 902 PEC 606 W PEC 607 IX PEC 506 W PEC 507 IX PEC 5406 W PEC 5507 IX PEC 6507 IX PEC 6406 W PEB 6408WH PEB 6708IX PEB 644 IX PEB 608 IX