Philco PW 166 - Příručka (Stránka 13)

EN - 11
08/2013 Copyright © 2013, Fast ČR, a. s.
Cleaning before use
Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the
inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this way
you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive
agents, which could damage the surfaces.
Electrical connection
Before connecting the power plug to the power socket, check that:
•
Your hands are completely dry.
• The voltage and frequency shown on the rating label of the appliance corresponds to that in the home
power grid (permitted tolerance from -6% to +6% for nominal voltage, for use with diff erent voltages, use
a voltage converter with the corresponding parameters).
• The cord and the plug are not damaged or caught under heavy objects.
• The power cord is not to be excessively tensioned; it is not permitted to use an extension cord.
Do not connect the appliance to a voltage rectifi er (e.g. solar power plant) or use an extension cord.
The appliance must be connected to a working grounding lead.
If the power socket of the home system is not grounded in accordance with the current legal regulations, only
connect the appliance after consulting with a specialised technician about the grounding lead itself.
The manufacturer takes no responsibility for injuries caused as a result of not following these instructions.
If you do not correctly level the appliance during the installation, the door may not close shut and seal properly,
which may cause problems with the cooling, ice build up or moisture. Levelling the appliance is very important.
Level the appliance using the levelling feet – turn them clockwise to lift the appliance and turn them
anticlockwise to lower the appliance.
Changing the door opening direction
These instructions are for the procedure for changing the opening direction for a door mounted on the right hinges.
To change the door opening direction from the right side to the left side, the following spare parts are
necessary: top left hinge and bottom left hinge. We recommend that you carefully store all removed parts for
the event that the door opening direction may need to be changed.
IMPORTANT INFORMATION
We recommend that you secure the racks in place using adhesive tape to prevent causing damage when
handling the appliance.