Philco PW 166 - Příručka (Stránka 19)

EN - 17
08/2013 Copyright © 2013, Fast ČR, a. s.
PART 5: REGULAR MAINTENANCE
Cleaning the appliance
Before commencing to clean the refrigerator disconnect it from the power source.
Wipe the internal surface of the appliance with a soft sponge lightly dipped in a table salt solution. Add
2 tablespoons of table salt into 1 litre of warm water.
Wash the racks in warm water with a small amount of kitchen dishwashing liquid, rinse and wipe dry. Allow
the wooden racks (if the wine cooler has them) to dry completely before returning them to the wine cooler.
All parts that you wash with a soft sponge lightly dipped in water must be properly wiped dry.
Wipe the outer surface with a soft sponge lightly dipped in water with a small amount of dishwashing liquid.
Wipe dry using a clean cloth.
WARNING:
Do not use steel wool or sponges with steel wool on stainless steel surfaces. They could damage the
surface.
Do not use cleaning waxes, concentrated cleaning agents, bleaches or cleaning products containing
kerosene to clean the plastic or rubber parts.
Never use paper towels or window cleaners on the plastic parts.
The use of steam cleaning appliances is extremely dangerous and so is strictly forbidden.
Removing the racks
Before removing racks from the appliance it is necessary to remove all the bottles in the given rack.
Pull the rack out as far as it will go. Press the left safety lever downwards and at the same time push the right
safety lever upwards. Now remove the rack.