Philco PW 166 - Příručka (Stránka 22)

EN - 20
08/2013 Copyright © 2013, Fast ČR, a. s.
e) Excessive vibrations.
Please check whether:
•
the appliance is levelled;
• there is anything loose inside the appliance or compressor.
f) The appliance is too loud.
Please check.
•
A characteristic noise may be made by the fl owing coolant. If so, this is normal.
• At the end of each cycle you may hear a gurgling sound caused by the fl owing coolant.
• The contraction and expansion of the internal walls may cause a cracking sound.
• Check that the appliance is correctly levelled.
g) The door does not shut and seal properly.
Please check whether:
•
The appliance is levelled;
• The door is turned upside down or incorrectly installed;
• The gasket seal is dirty;
• The racks are in their correct location.
h) Area around the door, the surface of the appliance is warm.
• The appliance is equipped with a heating system around the door, which prevents frost formation and
water condensation. This is a normal event. This system does not aff ect the temperature inside the
appliance.