Philco PW 166 - Příručka (Stránka 15)

EN - 13
08/2013 Copyright © 2013, Fast ČR, a. s.
3. Use a fl at-head screwdriver to remove the bottom hinge cover (12) and screw out the screws (3c) and
(13), including the bottom hinge (10). Move the bottom hinge to the other side and secure in place using
screws (3c) and (8). Place the bottom hinge cover (12) over the place of the initial bottom hinge (10).
4. Place the washer (11) on to the support hinge draw bar (9). Seat the door on to the bottom hinge so that
the support hinge draw bar (9) is fl ush with the outer hole of the bottom hinge. Use screws (3a) to install
the top hinge. Install the lock cover (6) and screws (7) and (8) and also attach the hinge cover.
NOTE:
The door handle is permanently attached at the factory. After changing the door opening direction, it is
not necessary to reinstall the handle, as rotating the door by 180° also ensures that the handle is rotated.