Philco PW 166 - Příručka (Stránka 14)

EN - 12
08/2013 Copyright © 2013, Fast ČR, a. s.
1. Remove the hinge cover (1) and the hinge cover (2) using a fl at-head screwdriver. Screw out the screws of
the mounted hinge (3a) and remove the top hinge. Now carefully take the door (5) off the bottom hinge
and place it to the side in a safe location. It is important that you do not lose the washer (11) of the bottom
hinge and door because you will need it.
2. Remove the lock cover (6) and screws (7) and (8) from the top hinge. Screw out screws (3b) to remove the
support hinge draw bar (9) from the bottom part of the door. Now rotate the door by 180° and mount the
support hinge draw bar (9) to the top corner using screws (3b). Check that the draw bar is installed correctly.