Philco PHS 602 - Příručka (Stránka 18)

EN - 16
06/2012 Copyright © 2012, Fast ČR, a. s.
 The minimum distance from the cut-out to the side wall must be: 40 mm. Do not locate the cooktop
between two side walls. If it is located in such a way, it is necessary to maintain a minimum distance of
200 mm from one of the side walls.
 The minimum thickness of the workbench into which the installation is made is:
- 30 mm if the installation is above an oven;
- 20 mm if the installation is without an oven or above a drawer.
- For the ventilation of the cooktop provide an opening in the top part of the rear wall of the furniture with
a width of 45 mm and a 20mm gap between the rear wall of the furniture and the kitchen wall. If you
will be installing the cooktop above a drawer, it is necessary to maintain a minimum distance of 65 mm
between the drawer and the top part of the workbench.
Positioning the cooktop in the workbench
Take the appliance out of the packaging and remove all advertising and promotional materials to check that
the appliance is not damaged. If the appliance is damaged or the power cord is damaged, do not use the
appliance and contact an authorised service centre.
Cut out an opening of the corresponding dimensions according to the picture here provided.
Adjacent wall A [mm] B [mm]
Flammable material 60 150
Infl ammable material 25 40