Part 3: operating the appliance, Turning the appliance on and off, Selecting a hotplate – Philco PHS 602 Uživatelská příručka
Stránka 8
EN - 6
06/2012
Copyright © 2012, Fast ČR, a. s.
PART 3: OPERATING THE APPLIANCE
The appliance is controlled by touching (pressing) buttons and the respective functions are shown on a display
and are accompanied by sounds.
Stand-by mode
S-Mode
Power is supplied to the appliance, the hotplate displays are off or the
warm hotplate function is activated.
Operating mode
B-Mode
At least one hotplate is on and the display shows a temperature from
0 to 9.
Lock mode
VR-Mode
The control panel is locked.
Turning the appliance on and off
If the appliance is in stand-by mode, press the main power switch
for about one second to switch the
appliance into operating mode. A sound is made each time a button is pressed.
A "0" will appear on each of the hotplate displays and the decimal points will start fl ashing (in one second
intervals).
If you do not perform any action within 10 seconds, all the hotplate displays will turn off .
When the display turn off , the appliance is switched to the stand-by mode.
If you press the main power switch
for more than 2 seconds (in operating mode), the appliance will turn off
and switch to the stand-by mode. You can turn off the appliance at any time by pressing the main power switch
. Even if you are pressing another button at the same time.
If any of the hotplates are still warm, the display of this hotplate will show the respective symbol indicating that
the hotplate is dangerously hot and there is a risk of injury.
Selecting a hotplate
Use the on/off button of a hotplate to turn on the respective hotplate. The decimal point of the selected
hotplate will start fl ashing. Use the
or
buttons to set the temperature in the range 1 - 9.
You must press the buttons within 3 seconds, otherwise the selection will be deleted and the decimal point
will disappear. If you do not press any button within 10 seconds, the appliance will automatically switch to the
stand-by mode.
NOTE:
Always set the temperature of the hotplate using the
or
buttons in the range from 1 - 9.
A sound is made each time a button is pressed.