Philco PHS 602 - Příručka (Stránka 19)

EN - 17
06/2012 Copyright © 2012, Fast ČR, a. s.
Apply single sided tape around the bottom edge of the cooktop - see picture below. Do not stretch too much.
Attach 4 mounting brackets into the side parts of the appliance.
Mounting brackets
Insert the cooktop into the cut-out hole in the workbench.
To ensure cooling, before inserting the oven, it is necessary to remove the rear kitchen panel in the location
where the oven is opened. The front part of the kitchen part must have a hole no smaller than 5 mm.
ATTENTION:
Under no condition should you glue this glass ceramic cooktop!