Philco PHS 602 - Příručka (Stránka 9)

EN - 7
06/2012 Copyright © 2012, Fast ČR, a. s.
Turning on dual and triple zones (available depending on the model)
Turning on a dual zone
Turn on the dual zone by pressing the
button. A sound is made. At the same time the d ual zone indicator
will light up.
Turning on a triple zone
Press the
button, a sound will be made and the dual zone will be activated. Press the button again.
A sound is made and the triple zone will be activated. The triple zone indicator will be lit and the triple zone
function will be activated.
Press the button again and the triple zone function will be deactivated. Each time it is pressed the hotplate
mode will change as follows: dual zone activated, triple zone activated, zones deactivated, dual zone activated,
triple zone activated, etc.)
NOTE:
The dual or triple zones may be turned on when the hotplate temperature is set in the range from 1 - 9.
Using the Boost function
All hotplates are equipped with the Boost function.
If the Boost function is activated, the hotplate will switch to maximum power for a preset time, which depends
on the se lected temperature setting. The "A" symbol and the set temperature will be intermittently shown on
the display in one second intervals. As soon as the Boost function time elapses, only the set temperature is
shown.
If the Boost function is used, the temperature must be set to 9 from 0 using the button. After the temperature
is set to 9, it will be intermittently shown on the display with the "A" symbol. This means that temperature 9 and
the Boost function are set.
You can also activate the Boost function by repeatedly pressing the button up to temperature 9. The
symbol "A" and 9 will intermittently fl ash on the display.
Turning off individual hotplates
You can turn off a hotplate in one of the following ways:
 Press the
and buttons at the same time.
 Lower the temperature to 0 by repeatedly pressing the
button.
 Turn on the timer function for turning off a hotplate.
Method for turning off a hotplate by pressing the and buttons at the same time
Use the on/off button of a hotplate to turn on the respective hotplate. The deci mal point of the selected
hotplate will start fl ashing. To turn off hotplates press the
and buttons at the same time. A sound is
made and "0" is shown on the display.
If the timer of the selected hotplate is activated, thereafter the display will show "0", the timer indicator and the
timer display will turn off .
If the hotplate is still dangerously hot, the display of the given hotplate will show the "H" symbol.