Philco PCE 32614 N - Příručka (Stránka 17)

EN - 15
05/2014 Copyright © 2014, Fast ČR, a. s.
PART 4: OPERATING THE APPLIANCE
The appliance is operated using the display located in the top part of the refrigerator.
The icons on the display will be backlit when the appliance's power plug is connected to a power socket. The
icon backlight will automatically turn off if you do not touch any icon and the doors are closed.
Controlling temperature
When you turn on the appliance for the fi rst time or after an extended period, the temperature in the refrigerator
will be set to 4 °C and in the freezer to -18 °C. If you wish to adjust the temperature, proceed according to the
instruction in another part of this user s manual.
WARNING:
Please keep in mind that when you set a temperature, this is an average temperature in the entire area of the
refrigerator / freezer. The temperatures inside each compartment may diff er slightly from the temperature
on the display, and this depends on the amount of inserted food, the number of times the door is opened,
etc. Likewise, ambient temperature may also aff ect the fi nal temperature inside the refrigerator.
Setting the temperature in the refrigerator
Short press the icon to set the temperature inside the refrigerator from 2 °C to 8 °C as required. The
indicator light of the selected temperature will be lit on the control panel. The temperatures will change in the
following order:
For standard operation we recommend that the appliance be set to a temperature of 4 – 6 °C.
IMPORTANT:
During hot summer days when the temperature control dial is set to 2 °C, the compressor may run
continuously. This is normal as the compressor is trying to maintain the temperature at the set level.
NOTE:
Inside the refrigerator there are outlets from the cold air distribution ducts. These outlets must remain
freely accessible and must not be blocked so that the proper operation of the appliance is ensured.
Setting the temperature in the freezer
Short press the icon to set the temperature inside the refrigerator from -16 °C to -24 °C as required. The
indicator light of the selected temperature will be lit on the control panel. The temperatures will change in the
following order:
For standard operation we recommend that the appliance be set to a temperature of -18 – -20 °C.