Philco PLD 1271 - Příručka (Stránka 11)

EN - 9
04/2012 Copyright © 2011, Fast ČR, a. s.
FUNCTION BUTTONS
Rinse hold
This function is recommended to be used when the clothes cannot be taken immediately after the end of the
program. This will prevent occurrence of wrinkles.When this button is pressed, the last rinsing water is not
drained. For the program to continue from the start pause, repress the start pause.
If you do not want your sensitive clothes to be spinned or you want them to be spinned sensitively, turn the
program knob to P (off ) position. Bring the program knob on one of the draining or spinning programs you
desire and press the start/pause button. If the program you have selected is a drain program, your machine
will draining the water inside.If you have selected a spinning program, your machine will perform a spinning
operation and then end the program.
Extra rinse
You can have one more rinsing done in addition to the rinses which your machine has made in all washing
programs by using this function.
Easy ironing
By using this function, you can ensure your clothes to come out less wrinkled after the washing.
Soak
Using this function will ensure better cleaning by leaving your clothes in water with detergent for a certain
period of time before your machine takes in the initial water and starts washing. This function is recommended
to be used for very dirty clothes.
WARNING!
If you have forgotten to use an additional function and the machine has started the wash operation
press the button of the additional function you wish to select; if the indicator lamp above it keeps
lighting the additional function you selected will become active. If the lamp stays lit for a certain
while and then goes out the additional function you selected will not become active.
NOTE:
Our products contain electronic cards and touchscreen buttons. Lightly pressing on the buttons will
suffi
ce to activate the functions.