Philco PLD 1271 - Příručka (Stránka 27)

EN - 25
04/2012 Copyright © 2011, Fast ČR, a. s.
FAILURE CODE PROBABLE FAILURE THE PROCESS TO BE DONE
The heater of your machine or the
heat sensor has failed.
Shut down your machine and
unplug. Turn off your tap and
apply to the nearest authorized
service.
The motor has failed.
Shut down your machine and
unplug. Turn off the tap and apply
to the nearest authorized service.
Electronic card has failed.
Shut down your machine and
unplug. Turn off the tap and apply
to the nearest authorized service.
The motor has failed.
Shut down your machine and
unplug. Turn off the tap and apply
to the nearest authorized service.
FAILURE CODE PROBABLE FAILURE THE PROCESS TO BE DONE
The network voltage is too high or
too low.
If the network voltage is lower
than 150V or higher than 260V,
your machine will automatically
stop. When the network voltage
is recovered, your machine will
continue its operation.
Communication error.
Shut down your machine and
unplug. Turn off the tap and apply
to the nearest authorized service.