Philco PLD 1271 - Příručka (Stránka 8)

EN - 6
04/2012 Copyright © 2011, Fast ČR, a. s.
• After connections are completed, check for the non-leakage of the connection joints by turning on your
tap completely.
• Be sure that water inlet hoses are not folded, broken or crushed.
• Mount the water inlet hoses to a 3”/4, geared water tap.
• If the washing machine has a dual water supply (for hot and cold water), the temperature of the hot water
should not exceed 70 °C.
Hot water inlet (Red fi lter valve)
Cold water inlet (White fi lter valve)
WATER DRAIN CONNECTION
• Be sure that water inlet hoses are not folded, twisted, crushed or elongated by stretching.
• Water drain hose should be mounted at a height of minimum 60 cm, maximum 100 cm from the ground.
• The end of the water drain hose may directly be fitted to the dirty water outlet hole or a special apparatus
mounted on the outlet bracket of the wash-stand.
• Never attempt to extend the water drain hose by adding extra parts.
NOTE:
Do not place the drain hose into a container, bucket or sink.