Philco PLD 1271 - Příručka (Stránka 7)

EN - 5
04/2012 Copyright © 2011, Fast ČR, a. s.
ADJUSTMENT OF FEET
•
Do not install your machine on rugs or similar surfaces.
• For your machine to work silently and without any vibration, it should be settled on a flat, non-slippery and
tough ground.
You can adjust the balance of your machine from its feet:
•
First, loosen the plastic adjustment nut.
• Adjust by rotating the feet upwards or downwards.
• After the balance has been reached, tighten the plastic adjustment nut again by rotating it upwards.
• Never put cartons, wooden blocks or similar materials under the machine to balance the irregularities on
the level of the ground.
ELECTRICAL CONNECTION
• Your washing machine works with 220-240V and 50Hz.
• A special grounded plug has been attached to the network cable of your washing machine. This plug
must definitely be inserted to a grounded socket with 10 ampere. The fuse flow value of the electricity line
attached to this should also be 10 ampere. If you have no such sockets and fuses in your house, let it be
made by a qualified electrician.
• Our company will not be responsible for any damages that may occur as a result of usage without
grounding.
WATER SUPPLY CONNECTION
• Depending on the features your machine,may be with single water inlet(cold) or double water inlet (cold/
hot). The white headed hose is for cold water inlet and red headed hose is for hot water inlet (valid for
machines with hot&cold water inlet).
• To prevent leakage from the connection joints, 1 (valid for cold water inlet) or 2 (valid for machines with
hot&cold water inlet) seals are included in the hose packing. Fit these seals at the end of water inlet hoses
on the tap side.
• Connect the white headed hose to the water inlet valve with white filter and connect the red headed hose
to the water inlet valve with red filter (latter is valid in machines with hot&cold water inlet). Tighten the
plastic parts of the connections with your hand. Please call a qualified plumber for safer connections.
• Water pressure of 0,1-1 MPa from your tap will enable your machine to work more efficiently. (0,1 MPa
pressure means water flow of more than 8 liters in 1 minute from a fully opened tap.)