Philco PGG 64 - Příručka (Stránka 11)

EN - 9
03/2012 Copyright © 2012, Fast ČR, a. s.
PART 5: MAINTENANCE AND CLEANING
Prior to maintenance or cleaning it is necessary to disconnect the power cord from the power socket and
to turn off the gas supply.
If the cooktop is hot then wait several minutes until it cools down. It is easier to remove food residues from the
surface while the surface is still slightly hot.
NOTE:
No part or accessory of the appliance is designed for washing in a dishwasher.
Clean the appliance after every use. Not only will maintenance be faster and easier, but this will also
extend the lifetime of the appliance.
Do not use sharp utensils or items to remove food residues.
Regular maintenance
The appliance must be inspected regularly. The technician who installed the cooktop or an authorised service
centre will inspect the gas supply and pressure setting (if the appliance is equipped with one).
Protective grills
Protective grills are mounted on metal pins (depending on the model), located on the sides of the cooktop to
ensure they are in correct position. To clean them better, you may remove the grills from the cooktop. Hold the
grills in a horizontal position and lift them upwards.
CAUTION!
Do not lift up the grills at an angle as this could apply too much force to the metal pins. The pins
could be damaged and crack.
Wash the protective grills in warm water with a small amount of kitchen detergent. To remove stubborn stains
you may also use a cleaning paste. Rinse and wipe dry.
Horizontally attach the protective grill on to the cooktop. While attaching it, take care not to scratch the surface
of the cooktop. Check that the grills are properly attached before using the appliance.