Philco PGG 64 - Příručka (Stránka 9)

EN - 7
03/2012 Copyright © 2012, Fast ČR, a. s.
PART 4: USING THE COOKTOP
After completing the installation check that the appliance is installed in accordance with the here contained
instructions and valid codes, or request that a qualifi ed technician performs a test ignition of all burners
and inspects all hotplates so as to check for gas leaks from the gas pipes and whether the electrical wiring is
connected properly.
NOTE:
To achieve the maximum effi
ciency of a burner, it is necessary to only use pots and pans which are suitable
for the given cooktop type, the diameter of which corresponds to the size of the respective burner. In this
way you will prevent the fl ame from extending past the bottom edge of the cookware.
Suitable cookware
Use cookware with a diameter of 12 – 18 cm on the smaller hotplate / burner.
Use cookware with a diameter of 24 – 28 cm on the larger hotplate / burner.
Symbols on the control panel
Symbol Meaning
No gas supply
Maximum gas supply
Minimum gas supply
CAUTION!
Before igniting a burner or placing pots or pans on it, check that the protective grill is in its place, it
is clean and the rubber washers are properly attached.