Philco PGG 64 - Příručka (Stránka 12)

EN - 10
03/2012 Copyright © 2012, Fast ČR, a. s.
Cooktop
Regularly wipe the surface of the cooktop with a soft sponge lightly dipped in water with a small amount of
kitchen detergent. Wipe dry using a clean wiping cloth.
Do not use steel wool, sponges with steel wool, petrol, benzene, thinners or any other solvents and similar
compounds, domestic cleaning agents and bleaches, sink stain removers, etc.
If the surface of the cooktop is very dirty, use special cooktop cleaning agents based on the surface type of
the cooktop.
CAUTION!
If cracks appear on the appliance, disconnect the appliance from the power socket and shut off the
gas supply so that injury by electrical shock cannot occur and contact an authorised service centre.
Do not place any items which could melt (plastics, aluminium foil) on the cooking surfaces.
Burners
The cover and crown of the burner can be removed for the purpose of maintenance and cleaning.
Wash the cover and crown of the burner in warm water with a small amount of kitchen detergent. Rinse and
wipe dry. You can use a gentle cleaning paste or even steel wool to clean away deposits.
Ignition electrode
If you are using a model with electrical ignition, which is performed by means of a ceramic and metal electrode,
it is necessary to constantly maintain the ignition components clean so that the burner ignites easily. Therefore
regularly check that the holes in the crown of the burner allow gas to pass through.
On models with ventilation also regularly clean the ventilation opening, which provides for the airfl ow
necessary for igniting the burner.
NOTE:
Do not use the burner or the entire appliance unless the burner is correctly assembled.