2N NetStar Mobility Extension configuration manual Uživatelská příručka
Stránka 24
24
Here you can set up the language of the application (currently only English
available) and the classic menu.
Application setup (Basic - Fig. 13):
Autostart: automatic launch of the application when turning the telephone on.
Log level: for testing purposes only; it does not need to be changed.
Show Called: shows the name of the contact called when calling via PBX. It is
good to switch it off on slower telephones to speed up the application operation.
Hangup Wait: time after which the application hangs up the originally dialed
contact and starts dialing it via PBX. Caution: on faster telephones, such Qtek
8310, it is good to set a longer delay, e.g., 700 ms, because otherwise the
application will hang up also calls to PBX immediately. On the other hand, on
telephones such as HP iPAQ 514 the delay of 300 ms is sufficient
Model situation:
Mobility Mob. Ext. ON/OFF
Modification of the status of the cellular (mobile) telephone is possible in the menu
item: Mob. Ext. ON/OFF (Fig. 14). If the user switches ME on, all calls routed to his/her
PBX number will also be routed to his/her cellular (mobile) telephone. If the user
wishes to change this status he/she selects the option: ME->OFF. A call with the
primary PBX is created when setting up the Mob. Ext. On/Off, and tone dialing is used
to enter a command to switch ME on or off. Caution: the application is not able to
retrieve the information from PBX whether ME is actually on or off, therefore it is
necessary first to set up the actual status of ME manually. In the primary PBX the
on/off status is displayed in the right corner of the screen on the telephone icon; if the
ME is set to ON in the application the telephone icon display is blue.
Tone dialing codes for switching the Mobility Extension function on and off can be
edited in:
Menu->ON/OFF->Set ME ON/OFF-> ME Settings