2N NetStar Mobility Extension configuration manual - Příručka (Stránka 35)

35
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Figure 6: View of possible router configuration according to the port
The default type of destination in the lower part of the router is selected in the case
that the call from the external station comes through non-specified port. In such case it
can be routed, for example, to the Internal router where the user is able to
communicate with all internal stations and use the PBX services but is limited when
calling outside the PBX.
Specific settings of the DISA direct inward dialing is shown on . With this Figure 7
configuration, the incoming call is routed to the Default router, and then follows a
15-second waiting time for dialing, which is then detected by DTMF detector (its
inclusion requires checking the DTMF option in the lower part). If the 15-second time
limit expires without detecting the dialing the call is then routed to the Reception
station.