LG F1091QD - Příručka (Stránka 278)

nstallation
Normal Tap without thread & screw type inlet hose
1. Unscrew the fixing screw to
attach the tap.
Upper
Connector
Rubber
packing
Fixing screw ~
2. Push the connector up tiii the
rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
3. Push the water suppiy hose
verticaiiy upwards so that the
rubber packing within in the
hose can adhere compieteiy to
the tap and then tighten it by
screwing it to the right.
Normal Tap without thread & one touch type inlet hose
1. Untighten the upper connector
screw.
Fixing screw
■ in case the diameter of the tap is
iarge remove the guide piate.
Guide plate
, Push the upper connector up 3.
tiii the rubber packing is in
tight contact with the tap. Then
tighten the 4 screws.
Rubber packing
Connector
Connect the water suppiy
hose to the middie connector,
pushing the piate down.
Plate
Middle
connector
•Turn the middie connector not
to have water ieaked.
• Make sure that the rubber seai
is inside the hose connector.
•To separate the water suppiy
hose from the middie
connector shut off the tap.
Then puii the iniet hose down,
pushing the piate down.
• Your machine comes with
oniy coid water connection.
• Make sure that there are no
kinks in the hose and that it
is not crushed.