LG F1091QD - Příručka (Stránka 298)

roubleshooting guide
Symptom Possible Cause Solution
• Water supply is not adequate in area. Check another tap in the house.
• Water supply taps are not completely open. Fully open tap.
ra © • Water inlet hose(s) are kinked. Straighten hose(s).
^'0: • The filter of the inlet hose(s) are clogged. Check the filter of the inlet hose.
y-k-i£i
e-0:"
• Drain hose is kinked or clogged. Clean and straighten the drain hose.
ra © • The drain filter is clogged. Clean the drain filter.
^0
• Load is too small. Add 1 or 2 similar items to help
• Load is out of balance. balance the load.
• The appliance has an imbalance detection and Rearrange load to allow proper
-0-1200 correction system. If individual heavy articles spinning
-O-
800
are loaded (ex. bath mat, bath robe, etc.) this
system may stop spinning or even interrupt
-o': w
the spin cycle altogether.
• If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
®-0" w"
Í0
■ Is the door opened?
Close the door.
If “! ' ” is not released, call for
52©*;-
^-0 "■*
service.
-^Ó'-95'C
Unplug the power plug and call for
-^0^30
-Ò'-^
service.
• Water overfills due to the faulty water valve.
Close the water tap.
Unplug the power plug.
Call for service.
®-©" s:
0
•Water level sensor has malfunctioned.
¿0 -.9,-*
® ©*
® 0
• Over load in motor.
«0?
H-0-
^0
• Over load in motor.
28