LG F1091QD - Příručka (Stránka 297)

roubleshooting guide
Symptom Possible Cause Solution
Washer does not
start.
• Electrical power cord may not
be plugged in or connection
may be loose.
Make sure plug fits tightly in wall
outlet.
• House fuse blown, circuit
breaker tripped,or a power
outage has occurred.
• Water supply tap is not turned
on.
Reset circuit breaker or replace
fuse. Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
Turn on water supply tap.
Washer will not spin. • Check that the door is firmly
shut.
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer begins to spin. The door
must lock before spin can be
achieved.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper
spinning.
Door does not open. Once machine has started, the door
cannot be opened for safety
reasons. Check if the “Door Lock”
icon is illuminated. You can safely
open the door after the “Door Lock”
icon turns off.
Wash cycle time
delayed.
The washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
Fabric softener
overflow.
Too much softener may cause
an overflow.
Follow softener guidelines to ensure
appropriate amount is used.
Do not exceed the maximum fill line.
Softeners dispensed
too early.
Close the dispenser drawer slowly.
Do not open the drawer during the
wash cycle.
27
I