LG F1091QD - Příručka (Stránka 280)

nstallation
Level adjustment
1. Adjusting the washing machine level properly prevents excessive noise and
vibration.
Install the appliance on a solid and level floor surface, preferably in a corner of
the room.
Timber or suspended type flooring may contribute to excessive
vibration and unblance errors.
2. If the floor is uneven, adjust the adjustable feet as required, (do not insert
pieces of wood etc. under the feet)
Make sure that all four feet are stable and resting on the floor and then check
that the appliance is perfectly level, (use a spirit level)
SK After the washer is level, tighten the loek nuts up towards of the base of the washer.
All lock nuts must be tightened.
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
ik- Diagonal Cheek
When pushing down the edges of the washing machine top plate diagonally, the
machine should not move up and down at all. (Please, cheek both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet
again.
■ Concrete floors
• The installation surface must be clean, dry and level.
• Install washer on a flat hard floor.
■ Tile floors (Slippery floors)
• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm
sections and stick the pieces on to the dry tile where machine is to be placed.)
^ Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
Rubber Cup
■ Wooden floors (Suspended floors)
•Wooden floors are particularly susceptible to vibration.
• To prevent vibration we recommend you place rubber cups under each foot, ( '^l^
at least 15mm thick under the washer, secured to at least 2 floor beams with screws.
• If possible install the washer in one of the corners of the room, where the floor is more stable.
iSf Insert the rubber cups to reduce vibration.
SK You can obtain the rubber cups (plno.4620ER4002B) from the LG spares dept.
Important! ^ * •
• Proper placement and levelling of the washer ensure long,regular and reliable operation.
• The washer must be absolutely horizontal and stand firmly in position.
• It must not “Seesaw” across corners under load.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
10,