Fenix CH2000B TURBO - Příručka (Stránka 9)

9
OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after hav-
ing not been used for a long period of time the heaters may emit some smell and fumes. This will disap-
pear when the heater has been on a short while.
Convector heater with thermostat and fan
CH2000B-TURBO
Choose a suitable location for the heater, taking into account the safety instructions
above.
Insert the plug of the heater into a suitable socket.
Turn the thermostat knob fully in a clockwise direction to the maximum setting.
Turn on the heating elements by means of the rocker switches on the side panel. When the
heating elements are on the switches will illuminate. For maximum heat output both switches
should be on.
When the desired room temperature has been reached, the thermostat knob should be
turned slowly anti-clockwise until the thermostat is heard to click off and the lights on the
element switches are seen to go out. After this the heater will keep the air temperature in
the room at the set temperature by switching on and off automatically.
In it’s minimum (fully anti-clockwise) position, the thermostat provides a frost guard position.
In this position (depending on the size of the room) the heater will maintain the temperature above freez-
ing.
Model CH2000B-TURBO also incorporates an internal fan, which can be switched on independently of
the heating elements.
Fan Operation: This is operated by means of the switch with the fan symbol along side it.
The fan will only operate with the thermostat in the “on” position and can be used when the heating ele-
ments are “on” to blow warm air into the room. In warm conditions the fan can be used with the heating
elements “off” to blow cool air into the room.
HEATER SWITCHES
FAN SWITCH
THERMOSTAT KNOB
CONTROL PANEL