Philco PDA 15103 X - Příručka (Stránka 34)

EN - 32
06/2013 Copyright © 2013, Fast ČR, a. s.
Delayed start
For selected programs you can delay their start by up to 24 hours thanks to the delayed start function. This
function cannot be activated for programs that have already been started.
1. After selecting a program, press the delayed start button.
2. The time "00:00" will appear on the screen and the delayed start indicator will start to fl ash.
3. Use the up / down buttons to set time after which the program should start. Each time the up / down
button is pressed, the delayed start will increase/decrease by 1 hour.
4. After the delayed start time has been set, press the Start/Pause button. The delayed start indicator will be
lit for the entire time of the delayed start. You can monitor the remaining time on the display.
5. When the delayed start time has elapsed, the selected program will start. The display will show the time
remaining until the end of the program.
Changing a program or function in the delayed start mode
1. Press the Start/Pause button.
2. The messages "program paused" (program paused) and "Delay timer active" (delayed start timer is
activated) will appear on the display. If you do not pause the countdown using the Start/Pause button and
use a diff erent button, the message "Delay timer active" (delayed start timer is active) or "invalid" (invalid)
will appear on the display. When the delayed start countdown is paused, select a new program and/or add
an additional function if necessary and press the Start/Pause button again.
Changing the set delayed start time
If you need to cancel or change the delayed start time, press the Start/Pause button. Use the delayed start
button to set a new delayed start time and press the Start/Pause button again.
Cancelling the delayed start
If you need to cancel the delayed start, press and hold the Start/Pause button for about 3 seconds.
The message "Program Cancelling...X" (program will be cancelled in ...X) will appear on the display, indicating
how much longer it is necessary to keep the button pressed. Now the delayed start function is cancelled.