En - 37 – Philco PDA 15103 X Uživatelská příručka

Stránka 39

Advertising
background image

EN - 37

06/2013

Copyright © 2013, Fast ČR, a. s.

The results

of the wash

are not sat-

isfactory.

Problem

Possible causes

What to do

The dishes

are not

clean.

The dishes were

not loaded into the

dishwasher correctly.

See chapter "Washing dishes / cutlery"

The program was not

intensive enough.

Select a more intensive program. See "Program table".

Insuffi

cient amount of

dishwashing detergent.

Use more dishwashing detergent or

use a diff erent one.

Dishes are blocking the

spraying arms.

Rearrange the dishes so that the spraying arms can rotate freely.

The fi lters on the bottom

of the dishwasher are

not clean or correctly

installed. This may cause

the spraying arm jets

to clog.

Clean the fi lter or install them properly. Clean out the spraying

arms. See "Cleaning the spraying arms".

There is rust

on glass.

Combination of soft water

and an excessive dose of

dishwashing detergent.

If you have soft water, for cleaning and washing glass use less

dishwashing detergent and a shorter cycle.

Black or

brown stains

on plates

Aluminium dishes were

leaning against the plates.

Remove these stains using a gentle cleaning agent.

Dishwashing

detergent

remained in

the com-

partment.

The dishes blocked the lid

of the compartment.

Rearrange the dishes in the dishwasher.

Drying

results are

not satis-

factory.

The dishes

are not dry.

The dishes were

incorrectly loaded.

Load the dishwasher with dishes according to the instructions.

You did not add enough

rinsing aid.

Increase the amount of rinsing aid / fi ll up the rinsing aid

compartment.

You took the dishes

out too soon.

Do not take the dishes out of the dishwasher immediately after

the wash. Slightly open the door so that steam is released.

Only take the dishes out when they are warm and you can hold

them in your hand. First unload the lower rack. This will prevent

wetting the dishes with water dripping from the upper rack.

You selected an incorrect

program.

During a short program the water temperature is lower. This also

reduces the washing effi

ciency. Select a longer program.

Knives do not have a

quality surface treatment.

Water drainage is a somewhat more diffi

cult from these items.

These types of knives or dishes are not suitable for dishwashers.

Advertising