Philco PHD 327 - Příručka (Stránka 10)

EN - 8
06/2012 Copyright © 2012, Fast ČR, a. s.
Timer elapsing
A sound is made after the timer elapses ("00" is shown on the display). If a hotplate timer elapses, the respective
hotplate will be turned off . The remaining set timers will be shown.
Press any button to cancel the sound. If not, the signal will automatically stop after 2 minutes.
Button sound
When the appliance is in operation, the following events will be accompanied by a sound:
 A short sound will be made when a button is pressed.
 Holding down a button for a longer duration (10 seconds) will be accompanied by a long uninterrupted
sound.
Boost function
The Boost function makes it possible to cook faster than when using the maximum selected level. Thi s function
will temporarily increase the maximum power of a select hotplate.
Select the respective hotplate, set temperature "9" and press the button.
The Boost function can be turned on, if the induction module enables such a setting for the respective hotplate.
When the Boost function is turned on, the "P" symbol will be shown on the display.
NOTE:
Under certain circumstances the Boost function can turn itself off to prevent damaging electronic
components inside the cooktop.
NOTE:
The Boost function is only available for one hotplate.
Cooking food
The information in the table below is only a reference.
Setting Used for
0 Hotplate is off .
1-3 Mild heating
4-5 Mild boil, slow heating
6-7 Medium heating and fast boil
8 Cooking, sautéing and frying
9 Maximum temperature
P Boost function