Timer functions, Temporary interruption of the child safety lock, Cancelling the child safety lock – Philco PHD 327 Uživatelská příručka
Stránka 9: Selecting a timer, Setting the timer, Deleting a timer
EN - 7
06/2012
Copyright © 2012, Fast ČR, a. s.
Temporary interruption of the child safety lock
To cancel the child safety lock function, fi rst turn on the appliance. Press the front hotplate button and the
reduce temperature button
at the same time. The "L" symbol will disappear from the display and "0" will be
shown. If the hotplate is still dangerously hot, the display of the given hotplate will intermittently show the "H"
and "0" symbols. After the appliance is turned off , the child safety lock function will turn on again.
Cancelling the child safety lock
To cancel the child safety lock, press the front hotplate button and the reduce temperature button
at the
same time and then press the
button again.
Timer functions
The appliance is equipped with 2 timer modes.
Hotplate timer: you can set a timer for a hotplate, which will turn off automatically after the set time has
elapsed.
Minute timer: it can be used even when the hotplates are turned off . A sound will be made after the set time
has elapsed.
Selecting a timer
A) Hotplate
timers
1. Turn on the appliance.
2. Turn on the respective hotplate.
3. Press
the and
buttons at the same time to select the hotplate timer.
b) Minute
timer
1. Turn on the appliance.
2. Press
the and
buttons at the same time to select the minute timer.
You can set an independent timer for each hotplate and one minute timer. To switch between the individual
timers, press the
and
buttons at the same time.
If you do not set any timer within 10 seconds, the initial setting will be shown.
Setting the timer
After the respective timer is shown, set its value using the
or
button. Press the
button once to set
30 minutes.
Press and hold the
or
to speed up the setting process. Speeding up the setting process will stop at
values 99 or 01, which are the initial setting values.
When setting a hotplate timer a decimal point of the respective hotplate is shown and when setting the minute
timer the colon on the timer display is lit.
An automatic countdown will start after the timer is set. If you need to extend / shorten the timer, press the
or
button.
Deleting a timer
Delete a timer by setting its value to "00". After the deleting a hotplate timer, the given hotplates will remain
in operation.