Philco PHD 327 - Příručka (Stránka 7)

EN - 5
06/2012 Copyright © 2012, Fast ČR, a. s.
PART 3: OPERATING THE APPLIANCE
Place the centre of the cookware on to the centre of the hotplate.
After connecting the appliance to a power socket, all the control indicator lights will turn on for a moment. The
device will then automatically switch to stand-by mode and is ready for use.
The cooktop is operated using electronic sensors, which are controlled by touching the respective sensors.
A sound (beep) is made each time a sensor is pressed.
Turning the appliance on and off
Press the main power switch to turn the appliance on. "0" will appear on the display of every hotplate
and the point indicator lights below will start fl ashing. (If you do not select a hotplate within 20 seconds the
appliance will turn off automatically.)
Turn off the appliance by again pressing the main power switch .
NOTE:
We recommend that you always turn off the appliance using the main power switch .
Turning the hotplates on and off
Turning on and selecting the temperature of the hotplate
Press the button of the hotplate that you wish to turn on. The fl ashing point indicator light of the selected
hotplate will stop fl ashing and at the same time all the remaining point indicators will stop fl ashing.
Set the appropriate temperature using the or buttons. Now the appliance and hotplate are ready for
cooking food. For faster heating, set the temperature to 9 and then lower the temperature.
Turning off the hotplate
Select the hotplate you wish to turn off and press hotplate selection button. Use the button to lower the
temperature to "0". (You can also press the and buttons at the same time to turn the hotplate off .)
NOTE:
If the hotplate is hot, an "H" will be shown on the display instead of the "0".
To turn off all hotplates at once, press the main power switch .
In the stand-by mode, the "H" symbol will appear on the display of all hot hotplates.