LG F1089QD - Příručka (Stránka 288)

nstallation
Level adjustment
1
.
Adjusting the washing machine level properly prevents excessive noise and
vihratinn.
Install the appliance on a solid and level floor surface, preferably ir a corner of
the room.
Timber or suspended type flooring may contribute to excessive
vibration and unbianco errors.
2. If the floor is uneven, adjust the adjustable feet as required, (do not insert
pieces of wood etc. under the feet)
Make sure that all faur feet are stable ahd resting on the floor and then check
that the appliance is perfectly level, (use a spirit level)
¡K AJkr fhi’ viaiher is ktvl, iigluen (be lock nun up iorvonfs »/ Ike buse of ike nmher.
AU look iiuii miisl be ligkieiiod.
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
if:-
DmgoHui Cheek
When psoikiHg tknvn Ihe otige\ of the vmshiHg ibu (:/ hík ? iop pínte áUtgonally. the
machine tíhnuíd not move up and down ai all. [Please, cheek hoik of two direciioHS}
If maehine vneia when pushing the maehine iop plate diagonally, adjnsi /he feel
again.
■ Concrete floors
•The installation sudace must be dean, dry and level.
• Install washer on a flat hard floor.
■ Tile floors [Slippery floors]
• Position each foot on the Tread Mate and level the machine to suit. {Cut Tread Mate into 70x70 mm
sections and stick the pieces on to the dry tile where machine is to be placed.)
X Tread.Mato is a self adhesive matorlat used on ladders & steps that prevents slipping.
Rubber Cup
■ Wooden floors (Suspended floors)
• Wooden floors are particularly susceptible to vibration.
• To prevent vibration we recommend you place rubber cups under each toot,
at least 15mm thick under the washer, secured to at least 2 tloor beams with screws.
• If possible install the washer in one of the corners of the room, where the floor is more stable.
Sf insert the rubber cups to reduce vibration.
X Ynu can obtain Ute rubher cups {plao.462t)ER4tH)2H) from ihe LG spares dept.
Important!
■ Proper placement and levelling of the washer ensure long, regular arid reliable operatiori.
■ The washer must be absolutely horizontal and stand firmly in position,
■ It must not “Seesaw" across corners under load.
•The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
10