Fenix GR panel - Příručka (Stránka 10)

10
Pic.7
TYP
Dimensions (mm)
(LxWxD)
Weight
(kg)
Power
(W)
Current
(A)
Voltage
(V) AC
Protection
class
Protection
GR 300 700x500x12 14 300 1,3
230 V II IP 44
GR 500 900x600x12 21 500 2,2
GR 700 1100x600x12 26 700 3
GR 900 1200x800x12 38 900 3,9
Important safety instructions - WARNING
In no case do cover the panel. The notice „DO NOT COVER" warns that any material,
by which the panel is covered, can cause the fire. It is not allowed to place any
furniture or to hang curtains before panel (see picture 7) and free air circulation must
be ensured. Regularly, at least before beginning of heating period, you should remove
dust from the panel. Do not touch the panel from the bath or shower!
Instructions for cleaning the panel:
Always clean the whole surface of the glass - never clean just small parts of it. Cleaning must be performed while the glass is wet! It is
recommended that the following glass cleaning agents which contain alcohol be used:
Clin – window cleaner spray (with alcohol), manufactured by Henkel
Vitro – an industrial window and mirror cleaner (2-butoxyethanol) made by Amstutz produkte AG
All products containing hydrofluoric acids or fluoride derivatives are prohibited as they may damage the coating and
surface of the glass.
Highly acidic or alkaline products are prohibited, and so are abrasive products.
After the application of cleaning agent, use a soft, clean, non-fraying cotton cloth. Do not apply any great pressure when carrying out the
cleaning itself, as this could cause scratches or smudges to appear on the surface of the glass. Wipe the glass in this way until the cleaning
agent dries up evenly. The more even the wet surface is, the lower the risk of smudging. Never use great pressure to wipe the glass dry! If
smudges appear on the glass anyway, please repeat the procedure.
The glass panel must be protected against aggressive substances such as lime, soda, cement, etc., and must not come into contact with any
kind of paint or varnish.
Technical data
•
The panel may be mounted on the grounds of the flammability class C, D.
•
Panel depth inclusive a holder is 70mm